This document describes the natural properties of the materials we use. It is enclosed with the offer and, upon the order confirmation, becomes part of the contract; it sets out the condition of the chosen materials that has been contractually agreed (§ 633 BGB).
Use: The offer and the order confirmation list the materials chosen for the respective project and refer to this document.
Kitchen units: EGGER Dekorspan
Manufacturer: EGGER Holzwerkstoffe (egger.com)
Our kitchen units (carcasses) are manufactured from EGGER Dekorspan panels with a laminate surface.
Natural properties (not defects):
- Slight structural and colour differences between different production batches
- Minimal dimensional tolerances in accordance with EN 14322 (decorative layer) and EN 312 (chipboard)
- Sensitivity to prolonged exposure to moisture at unprotected cut edges
Manufacturer information: egger.com/produkte
Fronts: Senosan Supermatt on MDF
Manufacturer: Senosan GmbH (senosan.com)
Matt, tactile surface made of PVC-free PMMA on an MDF substrate.
Natural properties (not defects):
- The anti-fingerprint coating reduces fingerprints but does not eliminate them completely
- Matt surfaces show fine processing marks under raking light (typical of the manufacturing process)
- Minimal colour variations between different production batches
- The surface is more scratch-resistant than lacquer but not scratch-proof; fine signs of wear with intensive use are normal
Manufacturer information: senosan.com/topmatt
Fronts: Decospan Shinnoki on MDF
Manufacturer: Decospan NV (decospan.com)
Real-wood veneer with a 6-layer UV lacquer coating on an MDF substrate.
Natural properties (not defects):
- Natural grain patterns and colour differences: every veneer is unique
- Colour change caused by UV light exposure over time (darkening or lightening depending on the wood species)
- Minimal gap formation at veneer edges due to seasonal fluctuations in humidity
- Batch-related colour variations on reorders
Manufacturer information: decospan.com/shinnoki
Worktops: Fundermax compact panels (6-20 mm)
Manufacturer: Fundermax GmbH (fundermax.com)
HPL compact panels (High Pressure Laminate) for use in the kitchen.
Natural properties (not defects):
- Slight colour variations between production batches
- Dimensional tolerances in accordance with EN 438 (HPL standard)
- Core structure visible at cut edges (brown/black), minimised by edge finishing
- The surface is heat-resistant up to approx. 180°C but not indefinitely; hot pots placed directly on the panel can cause discolouration
Manufacturer information: fundermax.com/kompaktplatten
Worktops: Ceramic (Dekton, Laminam, etc.)
Manufacture and installation: by our worktop partner, to our measurements and on our behalf
Ceramic and natural-stone worktops are manufactured and installed by our worktop partner to our measurements and on our behalf. We remain your contractual partner and the party liable under warranty for the worktop, including its installation; we are answerable for the work of our worktop partner as we would be for our own staff (§ 278 BGB).
Natural properties (not defects):
- Batch-related colour variations: even with technical ceramics such as Dekton, the appearance varies between production batches
- Natural-stone looks (e.g. marbling) are reproductions and deliberately differ from batch to batch
- Surfaces with a matt finish show fine marks under raking light (typical of the manufacturing process)
- Minimal dimensional tolerances for cut-outs (sink, hob)
Fittings: Hettich, Kesseböhmer, Sige spa
Manufacturers:
- Hettich (hettich.com): hinges, drawer systems
- Kesseböhmer (kesseboehmer.com): pull-out systems, storage solutions
- Sige spa (sigespa.com): pull-out systems
Natural properties (not defects):
- Drawers and pull-outs require fine adjustment after installation (the readjustment approx. 1 month after fitting is a voluntary, additional service; statutory warranty rights remain unaffected)
- Running noises in drawer systems vary depending on the load and the installation situation
- Metal parts with a brushed surface develop fine hairline scratches in use; this is typical of the material and not a defect
- Manufacturing-typical tolerances in gap widths (±1 mm)
General notes
The properties described above are typical of the materials and do not constitute defects. They are an expression of the craftsmanship of manufacture and of the natural condition of the materials used.
Colour and texture samples shown during the consultation are reference examples. The finished product may differ due to natural material and batch variations.
As of: September 2026
Kolev Architektenküchen, owner Rusi Kolev