{"id":27424,"date":"2026-09-20T19:39:35","date_gmt":"2026-09-20T17:39:35","guid":{"rendered":"https:\/\/kolev-kuechen.de\/?p=27424"},"modified":"2026-10-13T12:05:26","modified_gmt":"2026-10-13T10:05:26","slug":"kitchen-fronts-material-comparison","status":"publish","type":"post","link":"https:\/\/kolev-kuechen.de\/en\/guides\/kitchen-fronts-material-comparison\/","title":{"rendered":"Kitchen fronts compared: foil, lacquer, laminate, Supermatt or real-wood veneer?"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\"><strong>For a kitchen meant to last 20 years, Supermatt or real-wood veneer fronts on MDF are the most durable choice in the mid-price range.<\/strong> Last updated: September 2026.<\/p>\n\n\n\n<ul class=\"wp-block-list kk-1min\">\n<li>Foil is the cheapest but the most likely to peel, often from the fifth year, later depending on the finish.<\/li>\n\n\n<li>Lacquer comes in practically any RAL or NCS shade. After a knock it can only be touched up in the spray shop.<\/li>\n\n\n<li>Laminate (HPL) is the most scratch-resistant surface in the comparison, but the edge stays visible.<\/li>\n\n\n<li>The right question when buying is not the finish but who will remake a single front in eight years.<\/li>\n\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Kitchen buying guide \u00b7 Module 6: Surfaces | Previous step: <a href=\"https:\/\/kolev-kuechen.de\/en\/guides\/kitchen-recycling-bin-pull-out\/\">Waste system<\/a> | Next step: <a href=\"https:\/\/kolev-kuechen.de\/en\/guides\/handleless-kitchen-grip-options\/\">Handleless: recessed grip or handles<\/a><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><a href=\"https:\/\/kolev-kuechen.de\/assets\/blog\/kuechenfronten-material-vergleich\/kuechenfronten-material-vergleich-muster-ki.webp\" data-elementor-open-lightbox=\"yes\"><img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/kolev-kuechen.de\/assets\/blog\/kuechenfronten-material-vergleich\/kuechenfronten-material-vergleich-muster-ki.webp\" alt=\"Kitchen fronts in a material comparison: Supermatt, real-wood veneer, lacquer and a textured wood effect side by side\" width=\"1600\" height=\"893\" loading=\"eager\"\/><\/a><figcaption class=\"wp-element-caption\">Four front finishes compared: Supermatt, real-wood veneer, satin-matt lacquer and a textured\/linen effect. AI-generated example image, not a photograph. <a href=\"https:\/\/kolev-kuechen.de\/en\/about-our-images\/\">About our images<\/a>.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">What matters in a front<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A front is made up of a carrier board (MDF or chipboard), a surface and an edge. The edge decides whether moisture gets in, the carrier whether the front is still flat in 10 years. In the showroom you are shown almost only the surface, yet of the three parts it is the one that decides least about service life. The price index in the table sets the foil-wrapped front at 1.0.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table>\n<thead>\n<tr>\n<th>Front type<\/th>\n<th>Construction<\/th>\n<th>Feel \/ look<\/th>\n<th>Knocks and scratches<\/th>\n<th>Repair \/ replacement<\/th>\n<th>Colour choice<\/th>\n<th>Price index<\/th>\n<th>For whom<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td data-label=\"Front type\">Foil<\/td>\n<td data-label=\"Construction\">PET, PVC or PP foil thermally applied to MDF<\/td>\n<td data-label=\"Feel \/ look\">matt to high-gloss<\/td>\n<td data-label=\"Knocks and scratches\">vulnerable at the edges<\/td>\n<td data-label=\"Repair \/ replacement\">not repairable, only swap the front while the finish is available<\/td>\n<td data-label=\"Colour choice\">wide, finishes get discontinued<\/td>\n<td data-label=\"Price index\">1.0<\/td>\n<td data-label=\"For whom\">a short usage horizon<\/td>\n<\/tr>\n<tr>\n<td data-label=\"Front type\">Laminate \/ HPL (e.g. Fundermax Max Compact)<\/td>\n<td data-label=\"Construction\">HPL solid-core board with no chipboard core, or HPL on a carrier board<\/td>\n<td data-label=\"Feel \/ look\">matt to textured, anti-fingerprint as an option<\/td>\n<td data-label=\"Knocks and scratches\">very scratch-resistant<\/td>\n<td data-label=\"Repair \/ replacement\">swap the front<\/td>\n<td data-label=\"Colour choice\">wide (Fundermax 213 finishes)<\/td>\n<td data-label=\"Price index\">1.1 to 1.5<\/td>\n<td data-label=\"For whom\">a hard-wearing everyday kitchen<\/td>\n<\/tr>\n<tr>\n<td data-label=\"Front type\">Lacquer (multi-coat, sprayed)<\/td>\n<td data-label=\"Construction\">lacquer on MDF<\/td>\n<td data-label=\"Feel \/ look\">satin-matt to high-gloss<\/td>\n<td data-label=\"Knocks and scratches\">vulnerable to knocks<\/td>\n<td data-label=\"Repair \/ replacement\">only in the spray shop<\/td>\n<td data-label=\"Colour choice\">practically any RAL\/NCS shade<\/td>\n<td data-label=\"Price index\">1.8 to 2.5<\/td>\n<td data-label=\"For whom\">a free choice of colour<\/td>\n<\/tr>\n<tr>\n<td data-label=\"Front type\">Supermatt Senosan<\/td>\n<td data-label=\"Construction\">co-extruded ABS\/PMMA film (acrylic) on MDF<\/td>\n<td data-label=\"Feel \/ look\">deep matt, anti-fingerprint<\/td>\n<td data-label=\"Knocks and scratches\">good, matt cannot be polished out<\/td>\n<td data-label=\"Repair \/ replacement\">swap the front<\/td>\n<td data-label=\"Colour choice\">Kolev standard palette<\/td>\n<td data-label=\"Price index\">1.3 to 1.6<\/td>\n<td data-label=\"For whom\">a low-maintenance matt kitchen<\/td>\n<\/tr>\n<tr>\n<td data-label=\"Front type\">Real-wood veneer Decospan Shinnoki<\/td>\n<td data-label=\"Construction\">real-wood veneer on 18\/19 mm MDF, 6 coats of UV lacquer, ready to use<\/td>\n<td data-label=\"Feel \/ look\">real wood, a uniform veneer pattern across the row<\/td>\n<td data-label=\"Knocks and scratches\">medium to good<\/td>\n<td data-label=\"Repair \/ replacement\">the front can be remade in a consistent colour, as long as the finish is available<\/td>\n<td data-label=\"Colour choice\">18 wood tones<\/td>\n<td data-label=\"Price index\">1.6 to 2.2<\/td>\n<td data-label=\"For whom\">a wood look without warping<\/td>\n<\/tr>\n<tr>\n<td data-label=\"Front type\">Solid wood<\/td>\n<td data-label=\"Construction\">solid wood<\/td>\n<td data-label=\"Feel \/ look\">real wood, moves<\/td>\n<td data-label=\"Knocks and scratches\">good, but warping possible<\/td>\n<td data-label=\"Repair \/ replacement\">involved<\/td>\n<td data-label=\"Colour choice\">wood tones<\/td>\n<td data-label=\"Price index\">2.5+<\/td>\n<td data-label=\"For whom\">country-style, classic<\/td>\n<\/tr>\n<tr>\n<td data-label=\"Front type\">Glass \/ ceramic<\/td>\n<td data-label=\"Construction\">glass or sintered stone on a carrier<\/td>\n<td data-label=\"Feel \/ look\">refined, cool<\/td>\n<td data-label=\"Knocks and scratches\">very high<\/td>\n<td data-label=\"Repair \/ replacement\">a special case<\/td>\n<td data-label=\"Colour choice\">limited<\/td>\n<td data-label=\"Price index\">a special case<\/td>\n<td data-label=\"For whom\">an accent, special fronts<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">The foil-wrapped front: why it peels<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Foil (PET, PVC or PP) is thermally drawn over MDF. At the edges and near appliances (the oven, the steam from a dishwasher) it peels in many kitchens, often from the fifth year, considerably later depending on the finish, and once foil has lifted it cannot be repaired, only the whole front can be replaced. The weak point is not the foil itself but the adhesive beneath it, which ages faster under heat than the surface does. Until then, foil is an honest front with a wide choice of finishes and the lowest price index in the comparison. For 20 years, it is not.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Laminate: the underrated middle ground<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Laminate (HPL, for example Fundermax Max Compact Interior with 213 finishes in the current collection) is the most scratch-resistant surface in the comparison and the one with the lowest price index that does not flake off. Its limits are the visible edge and, depending on the range, the choice of finishes. The solid-core board does not swell at the edge, because there is no chipboard core beneath it, but the core stays visible as a line at the edge. According to the manufacturer the board is resistant to moisture and disinfectants, and with the Aptico surface it also comes with anti-fingerprint. For an everyday kitchen that should take more than it shines, HPL at an index of 1.1 to 1.5 is the underrated choice.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Matt or high-gloss<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">High-gloss shows scratches and fingerprints more strongly. Supermatt with anti-fingerprint (Senosan AM1800 TopMatt) barely takes fingerprints, and high-gloss lacquer can be polished, while high-gloss foil and deep-matt surfaces cannot. For a kitchen that is cooked in every day, I recommend matt: it forgives 10 years of everyday use, whereas high-gloss shows every wipe of the sponge. The market has long since arrived there: matt has overtaken high-gloss across the manufacturers, and the palette is moving towards warm tones like taupe, greige, sand and olive green. High-gloss has its place in a dark room where the fronts are meant to throw light back.<\/p>\n\n\n\n<figure class=\"wp-block-video kk-video\" style=\"margin:1.5em 0\">\n<video controls playsinline preload=\"none\" width=\"1280\" height=\"720\" poster=\"https:\/\/kolev-kuechen.de\/assets\/blog\/kuechenfronten-material-vergleich\/kuechenfront-anti-fingerprint-senosan-test-poster.webp\" style=\"display:block;width:100%;height:auto;aspect-ratio:16\/9;background:#0C1C28\">\n<source src=\"https:\/\/kolev-kuechen.de\/assets\/blog\/kuechenfronten-material-vergleich\/kuechenfront-anti-fingerprint-senosan-test.mp4\" type=\"video\/mp4\">\n<a href=\"https:\/\/kolev-kuechen.de\/assets\/blog\/kuechenfronten-material-vergleich\/kuechenfront-anti-fingerprint-senosan-test.mp4\">Watch the video (MP4, 4.3 MB)<\/a>\n<\/video>\n<figcaption class=\"wp-element-caption\">The manufacturer&#8217;s fingerprint test: a drop on each panel, a finger, one wipe with a cloth; left Senosan TOP M (AM1800 TopMatt), right a standard acrylic foil. Video: senoplast.<\/figcaption>\n<\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Lacquer: the free choice of colour and its price<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lacquer comes in practically any RAL or NCS shade on MDF, at roughly 1.8 to 2.5 times the price of a foil-wrapped front. After a knock it can only be touched up in the spray shop, not on site. Re-lacquering costs roughly \u20ac100 to \u20ac300 per front, and the new batch rarely matches the old shade exactly. Well cared for, a multi-coat lacquer front lasts 15 years and longer. Its weaknesses are micro-scratches and chipping edges. If you want a particular colour, this is the only place to get it.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Acrylic instead of lacquer: why Senosan Supermatt is our standard<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Senosan Supermatt is not a lacquer but a co-extruded ABS\/PMMA film (PMMA is acrylic), laminated flat onto the MDF board: deep matt, anti-fingerprint, colour- and UV-stable, and without the knock-sensitivity of a sprayed lacquer front. The top layer is acrylic glass, PVC-free, and the manufacturer senoplast rates it as scratch- and chemical-resistant. Technically this too is a foil, but one of acrylic rather than PVC or PET, laminated flat onto the board instead of thermally drawn over the edge. That is the difference from the foil-wrapped front in the section above. Being PVC-free is, alongside matt and anti-fingerprint, our second reason for choosing it. What it cannot do: scratches in the matt surface cannot be polished out, and the colour choice is a palette of plain and metallic tones, not a RAL chart.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Why I prefer acrylic to lacquer: in my experience, lacquered fronts fail far more often in the long run. We often get requests to replace only the fronts because the lacquer is peeling, in kitchens long out of warranty. And a lacquered front is raw MDF that gets sprayed: if a single front has to be replaced years later, the colour can hardly be matched, which is why in renovations I keep seeing the whole row replaced. A Senosan front, by contrast, we make again singly, today or in five years, in the same colour, as long as the shade is still in the range.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Real-wood veneer or wood effect<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Real-wood veneer (Decospan Shinnoki) reads across the whole row of fronts as if cut from one piece, because Decospan joins veneer strips from different trees into a uniform, repeatable veneer pattern (Mixmatch). A wood effect, by contrast, repeats every few fronts as a pattern repeat. A grain that runs continuously across several fronts is a separate, individual veneering technique and cannot be reordered in a matching colour; the uniform pattern of Shinnoki can. Shinnoki comes ready to use: a real-wood top veneer on an 18\/19 mm MDF core, sealed with 6 coats of UV lacquer, 18 wood tones, no further treatment. A wood effect on foil or HPL is a photograph of wood. In raking light you can see the difference. The choice of wood in detail follows in the guide <a href=\"https:\/\/kolev-kuechen.de\/en\/guides\/wood-kitchen-fronts-veneer-vs-effect\/\">real-wood veneer or wood effect<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The joint: why the carrier has to be MDF<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">With a 3 mm front joint, every bit of warping shows; chipboard moves with the humidity, MDF stays dimensionally stable, which is why at Kolev every front is on MDF; with a 4 to 5 mm industrial joint no one notices. The same holds against solid wood: it moves across the grain with the moisture and is therefore traditionally built as a frame with an infill, never as a flat front. MDF has one limit: if water sits in an open edge, it swells, which is why the sealed edge counts for more than the surface.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The mistake almost everyone makes: the replacement front<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A single replacement front in our standard acrylic material costs from around \u20ac200 for the new board plus about \u20ac50 to \u20ac60 for CNC cutting and edge banding, because even for a single front a completely new board is produced. Whether you reorder one front or five that still match the finish makes no difference to the unit price. If, on the other hand, the finish has been discontinued, it turns into a whole-row replacement, which on top of the fronts also needs new drilling, a new installation and a new site survey, and from around \u20ac3,000 is a good guide figure for that. How short this horizon is, the industry says itself: Egger runs its Dekorativ 26+ collection as a rolling collection that is updated at least every two years, and guarantees new finishes for at least four years. Egger calls that planning security. After that a finish can be discontinued, and a front reordered from a new batch often no longer matches the 12 beside it in colour. What I hear most often in first meetings: the foil came loose after five to ten years, sooner by the hob and the window, the edging has yellowed, and a single new front would stand out at once, because the sun has changed all the others evenly. That is why we would rather earn a little less on a kitchen and not get calls in ten years because the fronts are coming loose. The right question when buying is therefore not &#8220;Which finish?&#8221; but &#8220;Who will remake this one front for me in eight years?&#8221;. With our fronts the complaint is never wear. The most common one is a transport scratch noticed in the first weeks, and the front is then remade and replaced while the kitchen stays usable.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How we do it at Kolev<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The standard is Senosan Supermatt and Decospan Shinnoki on MDF, lacquer in hundreds of colours on request, a 3 mm joint, and the workshop drawing stays archived so that a single front can be remade years later, as long as the finish is available. Both standard materials are chosen for dimensional stability, colour-consistent remaking and long-term availability, not for the collection of the season. Shinnoki is deliberately joined by Decospan so that a reorder matches the existing set even years later. Swapping in a remade front takes minutes, and it matches the others in size and colour.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><a href=\"https:\/\/kolev-kuechen.de\/assets\/blog\/kuechenfronten-material-vergleich\/moderne-kuechenfronten-senosan-metallic-matt.webp\" data-elementor-open-lightbox=\"yes\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/kolev-kuechen.de\/assets\/blog\/kuechenfronten-material-vergleich\/moderne-kuechenfronten-senosan-metallic-matt.webp\" alt=\"Kitchen cabinet door materials: three Senosan acrylic fronts in metallic matt, dark grey, champagne and grey\" width=\"1600\" height=\"1067\" loading=\"lazy\"\/><\/a><figcaption class=\"wp-element-caption\">Senosan fronts in metallic matt, three shades side by side. Image: senoplast.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently asked questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">What is the most durable kitchen front?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">On an MDF carrier, Senosan Supermatt and Decospan Shinnoki real-wood veneer are the most durable choice for 20 years: no peeling, no warping. Laminate (HPL) is even more scratch-resistant, but shows the edge. Foil is the shortest-lived: peeling often begins from the fifth year, later depending on the finish.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Which kitchen front is easy to look after?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Deep matt with anti-fingerprint, that is Senosan AM1800 TopMatt, barely takes fingerprints and is cleaned with water and a soft cloth. Laminate is similarly forgiving. High-gloss lacquer shows every mark and every wipe of the sponge.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Are matt kitchen fronts delicate?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Anti-fingerprint matt is fit for everyday use, even in a family kitchen with daily cooking. The limit is that deep-matt surfaces cannot be polished out, so a deep scratch stays. Scouring agents are off-limits on all matt surfaces. Nothing more than water is needed.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What does a lacquer front cost by comparison?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">About 1.8 to 2.5 times a foil-wrapped front, depending on the gloss level and the coat build-up; Senosan Supermatt sits at 1.3 to 1.6, real-wood veneer at 1.6 to 2.2. Lacquer adds the repair risk: re-lacquering costs \u20ac100 to \u20ac300 per front, and the shade rarely matches exactly.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can foil-wrapped fronts be repaired?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. Once foil has lifted it cannot be repaired: only the whole front can be replaced, and that only as long as the finish is available; manufacturers often guarantee a finish for just a few years, Egger for example at least four years in a rolling collection. After that, only the whole-row replacement remains.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What is Senosan?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Senosan is a brand of senoplast Klepsch: a co-extruded ABS\/PMMA film whose top layer is PMMA, that is acrylic glass, laminated flat onto MDF. The Supermatt variant AM1800 TopMatt is deep matt, anti-fingerprint, UV-stable and PVC-free, and the high-gloss line is called TOP X; Senosan is not a lacquer, not PET and not HPL.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Next step: the first consultation<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Which front suits your kitchen is decided by the room, the light and how you cook. In the first consultation we look at your room, your wishes and your budget, directly with the architect, 45 to 60 minutes, for Frankfurt and the Rhine-Main region. <strong>Personal. Free of charge. No sales pressure.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">And a piece of advice no kitchen studio likes to give: get three offers and compare them. We are one of them.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong><a href=\"\/en\/start\/\">Book a first consultation<\/a><\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Why a damaged front is no drama with us: <a href=\"https:\/\/kolev-kuechen.de\/en\/guides\/replacing-kitchen-fronts-cost\/\">replacing a kitchen front<\/a>. The most common mistakes when buying a kitchen: <a href=\"\/en\/referenzen\/fuenf-denkfehler\/\">12 Kitchen-Buying Mistakes guide<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Kitchen buying guide \u00b7 Module 6: Surfaces | Previous step: <a href=\"https:\/\/kolev-kuechen.de\/en\/guides\/kitchen-recycling-bin-pull-out\/\">Waste system<\/a> | Next step: <a href=\"https:\/\/kolev-kuechen.de\/en\/guides\/handleless-kitchen-grip-options\/\">Handleless: recessed grip or handles<\/a><\/p>\n\n","protected":false},"excerpt":{"rendered":"<p>Foil, lacquer, laminate, Supermatt or real-wood veneer: for 20 years, fronts on an MDF carrier with Senosan Supermatt or Decospan Shinnoki are the most durable. Compared by build, repair, colour and price.<\/p>\n","protected":false},"author":1,"featured_media":27425,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[78,89],"tags":[],"class_list":["post-27424","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-guides","category-fronts-handles"],"_links":{"self":[{"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/posts\/27424","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/comments?post=27424"}],"version-history":[{"count":5,"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/posts\/27424\/revisions"}],"predecessor-version":[{"id":29064,"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/posts\/27424\/revisions\/29064"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/media\/27425"}],"wp:attachment":[{"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/media?parent=27424"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/categories?post=27424"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kolev-kuechen.de\/en\/wp-json\/wp\/v2\/tags?post=27424"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}